Screen Printing Squeegee Glue Grinding Mahcine
Dedicated to the screen printing industry,It can grind domestic and imported squeegee glue and is widely used in the silk screen printing industry. The machine has novel shape, reasonable structure, large working area, full function, simple operation, convenient maintenance and adjustment.
Equipment Features
1.High production efficiency and short Squeegee grinding time.
2. The squeegee rubber adopts the card lock design to adjust the deformation scraper to ensure the grinding quality.
3. Used in a variety of different brands of scrapers, can be used for mechanical scraper and manual scraper grinding.
4. Special grinding design, diamond grinding wheel without pressure, scraping rubber is not deformed, no wave strong phenomenon, durable, grinding wheel is easy to install and disassemble.
5. Grinding angle 0-45 ° to match the performance of various special prints, the grinding wheel speed is stable, the grinding effect is good.
6. Equipped with a vacuum device that can reduce industrial pollution, is conducive to the health of the staff and equipment maintenance.
7. Easy to operate, can operate without professional skills.
Grinding motor | 0.35KW |
Transmission motor | 200W |
Vacuum motor | 1200W |
Grinding size | 1000MM |
Grinding angle | 0-45 ° |
Total power | 1.75KW |
Total power supply | 380/220V, 50 HZ |
Overall machine dimension | 1800X600X1480 mm (L × W × H) |
The Squeegee size that can be grind: within 1000MM squeegee glue can be ground, Accuracy: plus or minus 0.05MM | |
Grinder operation steps
1. Turn on the main power and press the start button (when not in place).
2. Turn on the drive to adjust the distance between the grinding wheel and the scraping glue.
3. Open the vacuum switch. Adjust the speed control knob on the left to make the running speed moderate.
4. Open the grinding wheel and grind it according to the requirements of use.
5. Turn on the main power supply and the vacuum cleaner is turned on .
(if the drive is in place, the drive is automatically turned on. If the drive is not in place, please press the drive switch to open it automatically).
The grinding wheel control switch is used for adjustment of the correction knife.
6. Turn off the grinding wheel switch → Turn off the vacuum cleaner → Turn off the main power supply.
