Full-automatic Flying Probe First-article Detecting Machine
JD-FAI995 is an advanced PCBA full-automatic flying probe detector in China and it subverts the traditional manual clamping test. The flying probe test is combined with the software to realize the fully-automatic clamping measuring component with automatic entry and exit of the board. Its efficiency is 5 times of the first-article detector of FAI, which reduces the production line switching time and improve the activation ration of the production line.
Equipment Parameter
| S/D | ITEM | Detailed Parameter |
| 1 | Circuit board detection | SMT furnace front circuit board (pertinax and red board); The solder paste boards only visual test and it does not support the electrical test. |
| 2 | The component size can be detected | For the component at the British 01005 and above, only one set of the probe is required to test. |
3 | Detection method | The probe can be selected to realize the automatic measurement of resistance, capacitance and inductance, to determine the test results automatically. The IC and triode can be inspected using the automatic optical characters, to quickly check the screen printing and polarity. The diodes can distinguish polarity and light up LEDs The average detection speed is 1 second/component and it is 3-5 times of the traditional FAI. |
4 | LCR bridge | Test frequency: 20Hz～ 300KHz, basic precision: 0.05%. Measurement and display range: R: 0.01m ohms - 99.9999M oh msL: 0.01nH～9999.9H C: 0.00001pF～9.9999F. The testing software can directly control and select the measuring gears and parameters. |
5 | Detection category covered | Data: wrong consumption of BOM, repetitive position, missing definition or more definitions of XY coordinates. Circuit board: more pastes, missing parts, wrong parts, reverse, flip over, offset or rotation, etc. |
| 6 | SPC process control | The test data are recorded in the whole process and it can output the statement in PDF to restore the test scenario in the later period and provide the tracing basis. |
| 7 | Component angle | Support the parts at any angle from 0 to 360 ° |
| 8 | Server mode | The central data base is selected to realize the centralized and unified management of FAI data. |
| 9 | MES system connection | Free open communication interface |
| 10 | Inspection results display | 21.5-inch liquid crystal display |
11 | Range of PCB size | M: 350mm*450mm, L: 480mm*550mm, XL: 650mm*550mm (it supports the customization of large sizes). |
| 12 | PCB clear height | Upper side: 25mm Bottom side: 50mm |
